Rotonde de Cartier Grande Complication Skeleton watch: Time to Strike

Rotonde de Cartier Grande Complication Skeleton watch. Introduced in 2015, it houses the Calibre 9406 automatic movement that comprises 578 components. The Calibre 9406 self-winding movement required 5 years of development time, 15 weeks of production time at the Cartier Manufacture, 10 weeks of decoration and finishing work and 5 weeks of assembly time. The skeleton movement is certified Poinçon de Genève and has approximately 50 hours power reserve after being fully wound. The Rotonde de Cartier Grande Complication skeleton watch features the minute repeater, flying tourbillon and perpetual calendar. Its 45mm diameter case is in 950 platinum and is 12.6mm thick. Priced at US$620,000. Photo: © TANG Portfolio. Elfa / Timmy. 2015 Salon International de la Haute Horlogerie

Rotonde de Cartier Grande Complication Skeleton watch. Introduced in 2015, it houses the Calibre 9406 automatic movement that comprises 578 components. The Calibre 9406 self-winding movement required 5 years of development time, 15 weeks of production time at the Cartier Manufacture, 10 weeks of decoration and finishing work and 5 weeks of assembly time. The skeleton movement is certified Poinçon de Genève and has approximately 50 hours power reserve after being fully wound. The Rotonde de Cartier Grande Complication skeleton watch features the minute repeater, flying tourbillon and perpetual calendar. Its 45mm diameter case is in 950 platinum and is 12.6mm thick. Priced at US$620,000. Photo: © TANG Portfolio. Elfa / Timmy. 2015 Salon International de la Haute Horlogerie

What happens when watchmaking complications such as the minute repeater, flying tourbillon and perpetual calendar are put together in a Cartier timepiece?

You will get the most complex of all Cartier timepieces and this is exactly what the brand debuted at the 2015 Salon International de la Haute Horlogerie in Geneva.

Known as the Rotonde de Cartier Grande Complication Skeleton watch, the brand required five years of development time, took fifteen weeks of production at its Manufacture, 10 weeks to decorate and finish, not to mention five weeks for the assembly.

The movement, the Manufacture Calibre 9406 MC, was assembled and set at Cartier’s fine watchmaking workshops in Geneva, above the brand’s boutique at 35 rue du Rhône.

“It took five years of development time from the brief to homologation,” highlights Carole-Forestier Kasapi, head, Movement Creation Department, Cartier. Kasapi is essentially the brainchild behind most, if not all, of the modern and amazing horological creations of the brand.

“The biggest challenge,” she adds, “… is the addition of complications and what was truly complicated were the issues and solutions regarding the thickness of the movement.”

Do note that the movement of the Rotonde de Cartier Grande Complication Skeleton watch, the Calibre 9406 MC, comprises 578 components. Indeed, what is most amazing is that this Calibre 9406 MC extra-flat skeleton automatic movement which packs in the high complications has the total diameter of 35mm and is merely 5.49mm thick!

Little wonder why the Rotonde de Cartier Grande Complication Skeleton watch is what the brand touts as its “most complex of all Cartier watches”.

“The thickness of 5.49mm marks a record for us. However, it was not our objective to seek out records when creating this movement,” she stresses.

The best way to understand and appreciate Cartier’s high horology complication piece is firstly, to slowly admire what is displayed on its dial.

At the 12 o’clock position is the flying tourbillon that features a titanium carriage that makes it more lightweight. A flying tourbillon is essentially a tourbillon but it does not feature an upper bridge that secures the [tourbillon] mechanism. Hence the “flying” tourbillon.

There a a platinum micro-rotor on the Calibre 9406 MC. It can be seen through the transparent sapphire case back on the Rotonde de Cartier Grande Complication Skeleton watch. This is an innovative two-level micro-rotor that enables a reduction in winding speed while limiting energy loss, the brand highlights.

The platinum micro-rotor at just about the three o’clock position. This is a two-level micro-rotor construction. Photo: © TANG Portfolio. Elfa / Timmy. 2015 Salon International de la Haute Horlogerie

The platinum micro-rotor at just about the three o’clock position. This is a two-level micro-rotor construction. Photo: © TANG Portfolio. Elfa / Timmy. 2015 Salon International de la Haute Horlogerie

On the Rotonde de Cartier Grande Complication Skeleton watch, the perpetual calendar displays are: the day of the week at 3 o’clock, the date at 9 o’clock and the month at 6 o’clock.

The leap year indication is also at the 6 o’clock position. A leap year occurs every four years. If kept continuously running, the calendar displays on the Rotonde de Cartier Grande Complication Skeleton watch will only require adjustments once every 100 years.

From the dial side of the Rotonde de Cartier Grande Complication Skeleton watch, one can also view the striking action of its minute repeater complication as the two hammers and gongs are visible.

Even the inertial fly-wheel is visible and it is located above the left hammer, between the seven and eight o’clock positions. The inertial fly-wheel regulates the rhythm and duration of the striking operation. The “inertial fly-wheel is freed of its upper bridge, making it truly ‘fly’,” states the brand.

“Developing the minute repeater mechanism was a very scientific process for us. There was a lot of software involved and it allowed us to understand what we were doing.

“Each time you move something, you change the sound because there are vibrations and with such software, we could see the level of intensity, richness, harmonics and timing frequency between each strike.

“The inertial wheel is for regulating the speed of the minute repeater action and one advantage is that it reduces any external noise that can affect the quality and sound of the strikes,” explains Kasapi.

Carole-Forestier Kasapi, head, Movement Creation Department, Cartier. A watchmaking genius, she is the brainchild behind most, if not all, of the modern and amazing horological creations of the brand. Photo: © TANG Portfolio. Elfa / Timmy. 2015 Salon International de la Haute Horlogerie

Carole-Forestier Kasapi, Head, Movement Creation Department, Cartier. A watchmaking genius, she is the brainchild behind most, if not all, of the modern and amazing horological creations of the brand. Photo: © TANG Portfolio. Elfa / Timmy. 2015 Salon International de la Haute Horlogerie

The minute repeater is a key highlight and challenge for the watch Manufacturers these days, more so than the tourbillon. “The tourbillon is today as common as the chronograph was 50 years ago. As such, this has led to the ‘demonisation’ of the tourbillon. That is why the focus in now on minute repeaters,” surmises Kasapi.

One security feature is the Rotonde de Cartier Grande Complication Skeleton watch is the all-or-nothing mechanism. Such a feature will mean the striking mechanism will either function correctly or not at all.

This is due to the fact that an inaccurate sounding of the time might result if for example, the repeater slide or pusher has not been activated properly. As such, the all-or-nothing mechanism is for avoiding partial activation of the striking system to prevent an inaccurate acoustic indication of time.

The million-dollar question is whether Cartier and Kasapi’s team have achieved the right balance in terms of sound acoustics for the Rotonde de Cartier Grande Complication Skeleton watch.

The brand has indicated that their study of “acoustics harmonics and tonalities has allowed them to combine the nobility of a platinum case with the richness of a unique sound that is at once clear and precise, pure and soft”.

Did the Rotonde de Cartier Grande Complication Skeleton watch exude clear, precise, pure and soft acoustics? The proof of the pudding is in the eating.

With the Rotonde de Cartier Grande Complication Skeleton watch on hand, Kasapi gladly obliged in sounding its striking mechanism.

How was the minute repeating acoustics? It was slow and steady, with a regular tempo. Yes, it was clear, precise and pure as well. It was actually impressive that this level of acoustics could be achieved with a platinum case.

We made an audio recording of the Rotonde de Cartier Grande Complication’s chiming thanks to Kasapi in January 2015 at the Salon International de la Haute Horlogerie. To have a better listening experience, do remember to turn up the volume and simply click on the play button below. Do pardon us for the background noise as the recording was not made in a sound room. The striking mechanism was activated by Carole-Forestier Kasapi. In other words, Cartier’s resident watchmaking genius is playing this for you:


Do you what time was struck? The chiming indicated that it was 12.54.

The movement, the Calibre 9406 MC, is skeletonized and it bears the Poinçon de Genève – the Geneva Seal. This means that the movement finishing, which includes chamfering of the bridges, drawing of the flanks and the polishing of the countersinks, are of high standards.

Cartier has definitely gained new ground in high horology with its Rotonde de Cartier Grande Complication. This is an amazingly elegant and highly complicated wristwatch. Photo: © TANG Portfolio. Elfa / Timmy. 2015 Salon International de la Haute Horlogerie

Cartier has definitely gained new ground in high horology with its Rotonde de Cartier Grande Complication. This is an amazingly elegant and highly complicated wristwatch. Photo: © TANG Portfolio. Elfa / Timmy. 2015 Salon International de la Haute Horlogerie

What’s more, the Rotonde de Cartier Grande Complication Skeleton watch features an openwork dial in 18K white gold. This allows the open display of its three high complications – the flying tourbillon, the perpetual calendar and what is most striking, literally (pun intended), is the striking mechanism of its minute repeater.

As the most complex of all Cartier watches to date, the Rotonde de Cartier Grande Complication Skeleton has undoubtedly achieved new heights for the brand in the high horology segment.

Another related article on minute repeaters on timewerke.com which we highly recommend is:
i. The world’s first wristwatch minute repeater: Still sound

Patek Philippe dome clocks – the Ref. 1665M “Peranakan Culture”, Ref. 1675M “Farquhar Collection” and the Ref.1677M “The Esplanade – Singapore”: The William Farquhar Connection

Taking its inspiration from illustrations found in the William Farquhar Collection of Natural History Drawings is Patek Philippe’s “Farquhar Collection” Ref. 1675M dome clock. One main feature on the side of the dome clock is the Black-capped Kingfisher / Pekaka kopiah hitam / Halcyon pileata, described as a migratory species and a fairly common visitor on the Malay Peninsula from the breeding grounds further north and in sub-tropical and temperate East Asia. On its right (and referenced from another drawing) are a pair of Blue-crowned hanging parrots / Burung serindit / Loriculus galgulus. The male is perched upright and has a red bib while the other one beneath it is about to feed on water apple fruits. Measuring no more than 12cm from the tip of its bill to its tail, this is one of the smallest parrots in the world. It is fairly common throughout forests in Malaysia and Singapore but is difficult to spot as is normally found high up in the canopies of large trees. Text referenced from Natural History Drawings: The Complete William Farquhar Collection, Malay Peninsula 1803 – 1818. Photo: © TANG Portfolio. Elfa / Timmy. 2015

Taking its inspiration from illustrations found in the William Farquhar Collection of Natural History Drawings is Patek Philippe’s “Farquhar Collection” Ref. 1675M dome clock. One main feature on the side of this dome table clock is the Black-capped Kingfisher / Pekaka kopiah hitam / Halcyon pileata, described as a migratory species and a fairly common visitor on the Malay Peninsula from the breeding grounds further north and in sub-tropical and temperate East Asia. On its right (and referenced from another drawing) are a pair of Blue-crowned hanging parrots / Burung serindit / Loriculus galgulus. The male is perched upright and has a red bib while the female beneath it is about to feed on water apple fruits. Measuring no more than 12cm from the tip of its bill to its tail, this is one of the smallest parrots in the world. It is fairly common throughout forests in Malaysia and Singapore but is difficult to spot as is normally found high up in the canopies of large trees. Text referenced from Natural History Drawings: The Complete William Farquhar Collection, Malay Peninsula 1803 – 1818. Photo: © TANG Portfolio. Elfa / Timmy. 2015

In 2015, Patek Philippe created three one-of-a-kind dome table clocks to commemorate the 50th anniversary of Singapore’s independence (1965 to 2015).

One of the dome clocks is the Ref. 1675M “Farquhar Collection” which takes its inspiration from the famed William Farquhar Collection of natural history drawings, as its name implies.

William Farquhar (1774 to 1839) was the first British Resident and Commandant of Singapore from 1819 to 1823. An emissary of Sir Thomas Stamford Raffles (1781 to 1826), Farquhar was part of the British negotiating team for the Singapore Treaty that led to the establishment of the British settlement and trading post on the island.

Those familiar with Farquhar’s watercolour prints will easily recognise not one but many illustrations, mostly of birds, this time meticulously reproduced using the art of cloisonné enamel on the Patek Philippe “Farquhar Collection” Ref. 1675M dome clock.

The other two are the Ref. 1665M “Peranakan Culture” dome clock and the Ref. 1677M “The Esplanade – Singapore” dome clock.

Patek Philippe “Farquhar Collection” Ref. 1675M dome table clock in cloisonné enamel. Pièce unique made in 2015 to commemorate the 50th anniversary of Singapore’s independence (1965 to 2015). This one-of-a-kind Patek Philippe dome clock was inspired by the William Farquhar Collection of Natural History Drawings which comprises 477 watercolour illustrations of flora and fauna in the Malay Peninsula region. The drawings, commissioned by Farquhar, were made between 1803 and 1818 by Chinese artists. To reproduce the selected historical natural history drawings, the enameller used transparent opaque and opalescent enamels in 78 colours. Tracing the outlines required 32.55 metres of gold wire (weighing 65.1 grams) measuring 0.2mm in diameter. Each enamelled element had to be fired between eight and fourteen times at temperatures of around 930 degrees Celsius. The hour circle is adorned with black enamelled Breguet numerals and frames a silver dial centre guillochéd with sand-coloured enamel. Height of the dome clock: 213.5mm. Reserve auction price: SGD270,000. Sold for: SGD1 million on 23 September 2015 with the entire proceeds going to the National Museum of Singapore. Photo: © TANG Portfolio. Elfa / Timmy. Singapore September 2015

Patek Philippe “Farquhar Collection” Ref. 1675M dome table clock in cloisonné enamel. Pièce unique made in 2015 to commemorate the 50th anniversary of Singapore’s independence (1965 to 2015). This one-of-a-kind Patek Philippe dome clock was inspired by the William Farquhar Collection of Natural History Drawings which comprises 477 watercolour illustrations of flora and fauna in the Malay Peninsula region. The drawings, commissioned by Farquhar, were made between 1803 and 1818 by Chinese artists. To reproduce the selected historical natural history drawings, the enameller used transparent opaque and opalescent enamels in 78 colours. Tracing the outlines required 32.55 metres of gold wire (weighing 65.1 grams) measuring 0.2mm in diameter. Each enamelled element had to be fired between eight and fourteen times at temperatures of around 930 degrees Celsius. The hour circle is adorned with black enamelled Breguet numerals and frames a silver dial centre guillochéd with sand-coloured enamel. Height of the dome clock: 213.5mm. Reserve auction price: SGD270,000. Sold for: SGD1 million on 23 September 2015 with the entire proceeds going to the National Museum of Singapore. Photo: © TANG Portfolio. Elfa / Timmy. Singapore September 2015

All three dome clocks were put up for auction during a private dinner held on 23 September 2015 whereby only those attending could make bids.

The good news was that the total of SGD2.45 million were raised with the Ref. 1675M “Farquhar Collection” securing the highest sale price of SGD1 million. This meant that this dome clock alone accounted for around 40% of the total proceeds raised.

The even better news – the dome clocks were donated by Patek Philippe with the entire sales proceeds raised being given to museums and charitable organisations. For example, the SGD1 million from the sale of the Ref. 1675M “Farquhar Collection” will go the National Museum of Singapore – the custodian of the William Farquhar Collection.

During a private Patek Philippe dinner held on 23 September 2015 at the Flutes restaurant at the National Museum of Singapore (seen above), a closed-door auction was held whereby only those present could bid for the three commemorative Patek Philippe dome clocks celebrating the 50th anniversary of Singapore’s independence – the Ref. 1665M “Peranakan Culture” dome clock, the Ref. 1675M “Farquhar Collection” and the Ref. 1677M “The Esplanade – Singapore” dome clock. Philippe Stern, honorary president of Patek Philippe was present. Thanks to the generosity of Patek Philippe and their special guests, a total of SGD2.45 million was raised for very meaningful objectives. Photo: courtesy of Patek Philippe. Singapore September 2015

During a private Patek Philippe dinner held on 23 September 2015 at the Flutes restaurant at the National Museum of Singapore (seen above), a closed-door auction was held whereby only those present could bid for the three commemorative Patek Philippe dome clocks celebrating the 50th anniversary of Singapore’s independence – the Ref. 1665M “Peranakan Culture” dome clock, the Ref. 1675M “Farquhar Collection” and the Ref. 1677M “The Esplanade – Singapore” dome clock. Philippe Stern, honorary president of Patek Philippe was present. Thanks to the generosity of Patek Philippe and their special guests, a total of SGD2.45 million was raised for very meaningful objectives. Photo: courtesy of Patek Philippe. Singapore September 2015

The Ref. 1677M “The Esplanade – Singapore” dome clock fetched SGD750,000 (with proceeds earmarked for the “Heritage Cares” program for beneficiaries of Singapore Comchest) while the Ref. 1665M “Peranakan Culture” was sold for SGD700,000 (with proceeds going to the Peranakan Museum).

The Singapore theme is naturally a common denominator for the three magnificent dome clocks. While the brand states that each captures the quintessence of Singapore, whether its past or present, its flora and fauna, culture and heritage or even modern landscape, we would like to take this further and deeper.

Patek Philippe “The Esplanade – Singapore” Ref. 1677M dome table clock hand-guillochéd in cloisonné enamel with silver leaf. Made in 2015 to commemorate the 50th Anniversary of Singapore’s Independence (1965 to 2015). This pièce unique presents the panoramic view of Singapore’s skyline featuring popular landmarks including the Singapore River. These include Marina Bay Sands, the Singapore Flyer and the ArtScience Museum under a night sky lit up by fireworks. The artist had to hand-guilloché the silver panels forming the dial and body of the clock to reproduce the geometric patterns of the buildings. To have the skyline and towers depicted, 6.25 metres of gold wire (weighing 12.5g) measuring 0.2mm in diameter and some 20 enamel colours were required. Most of the colours were transparent with a few opalescent tints and one opaque shade. There are inclusions of silver leaves beneath the translucent enamel to conjure up the glow of fireworks, the glitter of the cityscape and the sparkle of light on water. Each enamelled element required 11 firings at temperatures ranging from 810 degrees Celsius to 920 degrees Celsius. The hour circle is adorned with black enamelled Breguet numerals. Height of the dome clock: 213.5mm. Reserve auction price: SGD300,000. Sold for: SGD750,000 on 23 September 2015 with the entire proceeds going to the :Heritage Cares” program for beneficiaries of Singapore Comchest. Photo: © TANG Portfolio. Elfa / Timmy. Singapore September 2015

Patek Philippe “The Esplanade – Singapore” Ref. 1677M dome table clock hand-guillochéd in cloisonné enamel with silver leaf. Made in 2015 to commemorate the 50th Anniversary of Singapore’s Independence (1965 to 2015). This pièce unique presents the panoramic view of Singapore’s skyline featuring popular landmarks including the Singapore River. These include Marina Bay Sands, the Singapore Flyer and the ArtScience Museum under a night sky lit up by fireworks. The artist had to hand-guilloché the silver panels forming the dial and body of the clock to reproduce the geometric patterns of the buildings. To have the skyline and towers depicted, 6.25 metres of gold wire (weighing 12.5g) measuring 0.2mm in diameter and some 20 enamel colours were required. Most of the colours were transparent with a few opalescent tints and one opaque shade. There are inclusions of silver leaves beneath the translucent enamel to conjure up the glow of fireworks, the glitter of the cityscape and the sparkle of light on water. Each enamelled element required 11 firings at temperatures ranging from 810 degrees Celsius to 920 degrees Celsius. The hour circle is adorned with black enamelled Breguet numerals. Height of the dome clock: 213.5mm. Reserve auction price: SGD300,000. Sold for: SGD750,000 on 23 September 2015 with the entire proceeds going to the :Heritage Cares” program for beneficiaries of Singapore Comchest. Photo: © TANG Portfolio. Elfa / Timmy. Singapore September 2015

On the surface, it seems obvious with what is stated as Singapore’s flora and fauna as depicted on the Ref. 1675M “Farquhar Collection” dome clock, Singapore’s Peranakan culture and heritage represented by the Ref. 1665M “Peranakan Culture” dome clock as this country was once part of the British-controlled Straits Settlements where many Peranakans were born, and the current Singapore skyline as seen on the Ref. 1677M “The Esplanade – Singapore” dome clock where major landmarks like the Marina Bay Sands and Singapore Flyer are featured.

Peranakans are generally described as the descendants of early Chinese immigrants who married natives of the Malay Archipelago and Bataks from Sumatra. They are also known as the Straits Chinese, having been born in the then British-controlled Straits Settlements covering Singapore, Penang and Malacca.

[Note: For more information on Peranakans and the “Peranakan Culture” dome table clock, do reference a related article: Patek Philippe Ref. 1665M “Peranakan Culture” dome table clock: Vibrant Flower Power.]

What must be noted is that Farquhar’s natural history drawings of flora and fauna were not unique to Singapore; they comprise watercolour drawings of what was observed and discovered in the region – the Malay Peninsula that Singapore is a part of.

Bear in mind that these watercolour artworks were painted in Malacca between 1803 and 1818 and not during the time when Farquhar was responsible for the administration of Singapore.

For us, the main link for all three dome clocks to Singapore is actually William Farquhar who was the first Resident and Commandant of Singapore from 1819 to 1823.

While not as well-known in history as Raffles, Farquhar’s contributions in the early development of Singapore should not be overlooked and must be recognized. Do not forget that in 1819, he assisted in the negotiations to set up the first British post on this island as well.

Farquhar was responsible for clearing land along the Singapore River back then. He also made Singapore an attractive place for people to trade and settle in. Granted, he “disobeyed” orders from Raffles and even allowed gambling dens to thrive but one must also look at the other side of the coin and perhaps allow him some slack for adopting a pragmatic approach given his limited resources. After all, Singapore quickly thrived under his administration (by around 1820).

Fast forward 200 years later and thankfully, Singapore today is still a thriving economy. The development along the Singapore River has evolved but remains an important area and this now includes the reclaimed land nearby.

What has sprouted up include the Marina Bay Sands, the ArtScience Musuem and the Singapore Flyer, key attractions for both local and foreign visitors and major landmarks depicted on the dome clock.

Marina Bay Sands which is featured on the Patek Philippe “The Esplanade – Singapore” Ref. 1677M dome clock is a popular landmark in Singapore and it opened in April 2010. The Marina Bay site was priced at SGD1.2 billion by the Singapore government and Las Vegas Sands, whose chairman and chief executive officer is Sheldon Adelson, secured the rights in May 2006. The top of the dome shows a display of fireworks. Photo: © TANG Portfolio. Elfa / Timmy. Singapore September 2015

Marina Bay Sands which is featured on the Patek Philippe “The Esplanade – Singapore” Ref. 1677M dome clock is a popular landmark in Singapore and it opened in April 2010. In 2005, the Marina Bay site itself was priced at SGD1.2 billion by the Singapore government and Las Vegas Sands, whose chairman and chief executive officer is Sheldon Adelson, secured the rights in May 2006. The top of the dome shows a display of fireworks. Photo: © TANG Portfolio. Elfa / Timmy. Singapore September 2015

Therefore, there is, in a sense, the Farquhar link to the modern Singapore skyline and hence, the Ref. 1677M “The Esplanade – Singapore” dome clock.

Farquhar’s collection of natural history drawings is not just a great reminder of his scientific activities but his contribution to mankind’s understanding of the flora and fauna in Southeast Asia, the Malay Peninsula in particular.

Moreover, it goes beyond that; it is also symbolic of a gentleman who was instrumental in the early development of Singapore. After all, it is through this William Farquhar Collection that was acquired by Goh Geok Khim who subsequently donated it to the National Museum of Singapore that even more people have begun to sit up and take notice of Farquhar and the role he played in Singapore’s history.

From a top-down perspective of the Patek Philippe “Farquhar Collection” Ref.1675M dome clock, you will have a view of this bird which we believe is inspired by the drawings of the Greater painted-snipe / Burung Meragi / Rostratula benghalensis from the William Farquhar Collection. In that drawing, there are actually three birds depicted, the flying bird as seen above is the male greater painted-snipe water bird. What is not seen or decorated on the dome clock is its female companion that is walking in the actual drawing and another bird, the migratory terek sandpiper, Xenus cinereus.  There are two points that we can highlight with this flying bird in cloisonné enamel. Firstly, you can easily make out the outline of the bird and it is done using a gold wire. In total, the outlines traced of the birds, leaves, flowers and even a butterfly on the Ref. 1675M “Farquhar Collection” dome clock required 32.55 metres of gold wire with a diameter of 0.2mm. The weight of the gold used amounted to 65.1 grams.  Secondly, this is perhaps an example of the “stiffness and flatness” of a drawing in the William Farquhar Collection alluded to by Kwa Chong Guan in his authoritative article, Drawing Nature in the East Indies: Framing Farquhar’s Natural History Drawings, but he balances this objective critique by adding that these (stiffness and flatness) only add to the interest and appeal of the drawings. Photo: © TANG Portfolio. Elfa / Timmy. Singapore September 2015

From a top-down perspective of the Patek Philippe “Farquhar Collection” Ref.1675M dome clock, you will have a view of this bird which we believe is inspired by the drawings of the Greater painted-snipe / Burung Meragi / Rostratula benghalensis from the William Farquhar Collection. In that drawing, there are actually three birds depicted, the flying bird as seen above is the male greater painted-snipe water bird. What is not seen or decorated on the dome clock is its female companion that is walking in the actual drawing and another bird, the migratory terek sandpiper, Xenus cinereus. There are two points that we can highlight with this flying bird in cloisonné enamel. Firstly, you can easily make out the outline of the bird and it is done using a gold wire. In total, the outlines traced of the birds, leaves, flowers and even a butterfly on the Ref. 1675M “Farquhar Collection” dome clock required 32.55 metres of gold wire with a diameter of 0.2mm. The weight of the gold used amounted to 65.1 grams. Secondly, this is perhaps an example of the “stiffness and flatness” of a drawing in the William Farquhar Collection alluded to by Kwa Chong Guan in his authoritative article, Drawing Nature in the East Indies: Framing Farquhar’s Natural History Drawings, but he balances this objective critique by adding that these (stiffness and flatness) only add to the interest and appeal of the drawings. Photo: © TANG Portfolio. Elfa / Timmy. Singapore September 2015

Without the William Farquhar Collection of natural history drawings, Farquhar may well have been forgotten and the thought of how he could well be one of Singapore’s “founders” will not even be worthy of any discussion today.

Yes, Farquhar was dismissed in 1823, but as noted by John Bastin in his authoritative article William Farquhar: First Resident and Commandant of Singapore, “Contrary to what has been written about him, Farquhar appears in his roles as Resident and Commandant of Melaka (Malacca) between 1803 and 1818, and of Singapore between 1819 and 1823, as a benevolent ruler, sympathetic to the interests of the people under his charge, and energetic in confronting the formidable problems of his complex administrations”.

Patek Philippe “Peranakan Culture” Ref. 1665M dome table clock in cloisonné enamel commemorating the 50th anniversary of Singapore’s independence (1965 to 2015). More than 28 metres of gold wire weighing 53.5 grams were required for this one-of-a-kind piece. This Ref. 1665M dome table clock is the very first third series Patek Philippe dome clock that is in rose gold. Reserve auction price: SGD250,000. Sold for: SGD700,000 on 23 September 2015 with the entire proceeds going to the Peranakan Museum. Photo: © TANG Portfolio. Elfa / Timmy. Singapore September 2015

Patek Philippe “Peranakan Culture” Ref. 1665M dome table clock in cloisonné enamel commemorating the 50th anniversary of Singapore’s independence (1965 to 2015). More than 28 metres of gold wire weighing 53.5 grams were required for this one-of-a-kind piece. This Ref. 1665M dome table clock is the very first third series Patek Philippe dome clock that is in rose gold. Reserve auction price: SGD250,000. Sold for: SGD700,000 on 23 September 2015 with the entire proceeds going to the Peranakan Museum. Photo: © TANG Portfolio. Elfa / Timmy. Singapore September 2015

Now what is the link between Farquhar and the Ref. 1665M “Peranakan Culture” dome clock? Apparently, while in Asia, Farquhar had either married or cohabited with a woman known as Nonio Clement or Clemaine from Malacca who was of French-Malay descent and they had six children.

The daughter of a French officer and an Asian mother, her name “Nonio” is said to be another form of the word “Nonya”. Could she well have been Peranakan as well? After all, female Peranakans are called nonyas or nyonyas while males are known as babas.

If so, then this is the link between Farquhar and the Ref. 1665M “Peranakan Culture” dome clock.

Note: After Farquhar returned to London, he married Margaret Loban and they had six children.

Interestingly, based on early indications, it seemed that the two highly desired dome clocks were actually the Ref. 1667M “The Esplanade – Singapore” dome clock and the Ref. 1665M “Peranakan Culture” dome clock.

The Ref. 1665M “Peranakan Culture” dome clock had another plus point in its favour: it is the first one in rose gold for a Patek Philippe third series dome clock, highlights John Reardon, senior vice president, international head of watches, Christie’s.

The fact that the Patek Philippe Ref. 1675M “Farquhar Collection” dome clock emerged as the dearest at SGD1 million during the closed door auction perhaps speaks volumes. All three dome table clocks are recognised for the artistry and high craftsmanship, but perhaps the Ref. 1675M “Farquhar Collection” dome clock struck a more emotional chord with some for its deep historical, cultural and symbolic significance.

And for another million-dollar consideration, since the old road honoring Singapore’s first Resident and Commandant was expunged in 1994, perhaps it is also time for to consider having a new one in Singapore named after Farquhar?

Another related article on timewerke.com which we highly recommend is:
i. Patek Philippe Ref. 1665M “Peranakan Culture” dome table clock: Vibrant Flower Power.